">What is a Vented Ridge - Softwoods

What Is a Vented Ridge?

Vented ridge

A vented ridge is a customised form of ridge cap that allows for the extraction of warmer air from within a gable pergola.

The way that a vented ridge works is by allowing air to escape by raising the ridge cap on the pergola using a steel “z section” which has holes along its length. These holes allow air to move into and out of the structure. As they are sitting under the ridge cap and are angled inwards however they won’t allow rain into the pergola.

Vented Ridge

Vented Ridge

To install a vented ridge you will need to order the correct metalgoods for the task. You will need a vented ridge cap (differs from a standard ridge cap as it has 40mm overhangs on each side to prevent weather from entering) Two  Z section flashings, as well as two end caps.

You need to ensure that you have a 40-50mm gap between the ridge and the top purlin on either side of it so that the air can escape through the ridge. Attach your roof sheets only as far as the edge of the top purlin, to ensure that the gap between the purlin and ridge is not covered over and will allow the air to flow through.

Vented ridge cross section

Vented ridge cross section

Once your roof sheets are on, attach the Z section to the top purlin with polycarbonate screws (or whichever screws you’ve used for your roofing) Be sure to pre drill a 10mm hole in your roof sheets for each screw to allow for movement.

Once the Z section has been attached to your roof sheets, you can install the ridge. Using pop rivets, attach the ridge to the top of the z section. Once this is done, you simply have to put the end caps in place (with rivets) and your ridge is complete.

Vented ridges are available in a number of Colorbond® colours, to order yours, give us a call or send an email and we can deliver to your home!

Purchase all your roofing requirements from the Softwoods online roofing store.


Get a FREE Quote for Your Pergola or Deck

Our online quoting tool lets you specify the measurements and other details about your planned pergola or deck. It then automatically generates an estimate for you.

Attached gable pergola with timber liningIronbark deck over sloping site with inbuilt stairs and stainless steel balustrade

Softwoods is a family owned South Australian company that has been trading for over 30 years.


We understand that making changes to your home is a major and important thing, and we take care to understand that every project that we handle should be done with as much care as we would expect is used in our own homes. Learn more about Softwoods.

We service, support and ship Australia-wide.

Use our design tool for a free quote or get in touch via email or phone
for a design or price on your project or materials.

Croydon, SA

573 Port Road
West Croydon SA 5008
Corner Rosetta Street

(08) 8346 1499

Modbury, SA

493 Wright Rd
Modbury SA 5092
Corner Wright & McIntyre Roads

(08) 8396 4044

Lonsdale, SA

28 O'Sullivan Beach Road
Lonsdale SA 5160
Corner Dyson Road

(08) 8384 5133

Perth, WA

Suite 15 Plaistowe Mews
102 Railway Street
West Perth WA 6005

1300 737 465